Gedore Professional All Inclusive Package Workshop Trolley with assortment is universally applicable when performing maintenance and repair work on passenger cars and vans.
• Very extensive and extremely robust hand tool assortment
• Ideal, mobile workplace
• Metric design
• 8 fully equipped drawers
• One empty drawer at the very bottom
• Broad drawers with full-extension runners
• Safety locking per drawer
Drawer 1 (1/4” assortment + pliers assortment)
• 1/4” assortment: Ratchet bit screwdriver, bit holder, bit box (32 pcs), bit adapter, reversible ratchet,
T-handle, T-handle ratchet, cardan joint, extensions (55 + 97 + 148 + 305 mm), socket spanners. double hex SW4-13 mm / hexagonal SW4-13 mm (long) / TX T10-40 / TX E4-10 / TX PLUS IP10-30 / TX PLUS EP6-12 / cross-head PH1-3 / slotted 5.5-6.5 / female hexagonal IN3-8)
• Pliers assortment: Power combination pliers, diagonal cutter, multiple pliers, flat pliers, universal pliers, circlip pliers kit (4 pcs)
• Hexagon L key kit (TX T9-40 / hexagon with ball head SW2-10 mm)
• Grip wrench brake line (11 mm)
• Steel measuring tape (5m)
• Magnetic lifter
Drawer 2 (3/8” assortment)
• 3/8“ assortment: Reversible ratchet, jointed reversible ratchet, cardan joint, extensions
(125 + 250 + 305 mm), extension with holding magnet, adapter (to 1/2" + to 1/4"), socket spanners hexagonal SW6-19 / double hexagon SW10-19 (long) / TX T20-50 (short + long) / TX E6-14 / female hexagon IN4-10 (short + long) / female hexagon with ball head IN7-11 (long) / XZN M5-10 (short + long) / TX PLUS IP40-60 / TX PLUS EP10-20), glow plug socket spanner (SW14 + 16 + 18)
• Voltage tester (6-48 Volt AC/DC)
• Torque wrench (3/8“, 10-50 Nm)
• Digital calliper gauge
• Feeler gauge
Drawer 3 (1/2” assortment)
• 1/2“ assortment:
Reversible ratchet, telescopic reversible ratchet, T-handle,
cardan joint, extension (125 + 205 mm), extension with holding magnet, adapter (to 3/8"), socket spanner
hexagon SW8-32 / TX T27-60 / TX E10-24 / female
hexagon IN5-17 / XZN M5-16 / TX PLUS EP22-32
• Torque wrench (1/4“, 40-200 Nm)
Drawer 4 (screwdriver assortment)
• Screwdriver assortment hexagon SW6-10;
female hexagon IN3-8 (with ball head);
Cross-head PH1-4 (with impact cap);
cross-head PH1 (short);
slotted 4.5-8 (with impact cap);
slotted 5.5 (short);
TX T10-40
• Univ. brake calliper hook pair
Drawer 5 (striking tool, file, drill assortment)
• Gasket scraper
• Workshop file (10” / round + half-round + flat blunt)
• Brake calliper file
• Metalworker’s hammer (400 + 1500 g)
• Soft-faced hammer
• Twist drill (1 - 13mm / 25 pcs)
• Pry bar (300 + 390 mm)
• Flat chisel (125 + 150 + 200 mm)
• Cross chisel flat oval
• Pin punch (3 + 4 + 5 + 6 mm)
• Drift punch
• Centre punch
Drawer 6 (combination spanner assortment)
• Special grip pliers
• Brake calliper brush
• Combination spanner (SW6-32)
Drawer 7 (screwdriver assortment)
• Open-end spanner with ring ratchet (SW8-19)
• Double ring spanner (SW6-24, TX E6-24)
• Starter block spanner (SW11-17)
• Double ring spanner open (SW8-19)
Drawer 8 (1/2” assortment long)
• Socket spanners hexagon SW10-32 (long); female hexagon IN6-14 (long);
TX T27-60 (long)
• Power screwdriver bit with protective sleeve (SW17-22)
• Power screwdriver bit (SW13-27)
• Cable stripping knife
• Universal combination shears